Conmed Sabre 2400 Electrosurgical Unit
January 31, 2017![Conmed Sabre 2400 Electrosurgical Unit Conmed Sabre 2400 Electrosurgical Unit](https://www.somatechnology.com/app/uploads/2017/01/conmed_sabre_2400_esu.jpg)
Conmed Sabre 2400 Features
- High power electrosurgical unit with footswitch.
- Full-power electrosurgical generator to accommodate the needs of all surgical procedures. Meets high demanding performance needs in electrosurgery.
- Features independent Monopolar outputs, enhanced bipolar performance. It is safe, convenient, cost-effective and can be programmed for standardization.
Conmed Sabre 2400 Specifications
General
- Pure Cut
- Max Power: 300 W.
- Max. P-P Voltage: 2000<./li>
- Load (ohms): 300.
- Crest Factor: 1.8.
- Blend Cut
- Max Power: 180 W.
- Max. P-P Voltage: 2200.
- Load (ohms): 300.
- Crest Factor: 2.5.
- Coag
- Max Power: 120 W.
- Max. P-P Voltage: 9000.
- Load (ohms): 500.
- Crest Factor: 7.0.
- Bipolar
- Max Power: 50 W.
- Max. P-P Voltage: 280.
- Load (ohms): 50.
- Crest Factor: 1.5 – 12.1.
Dispersive Electrode Monitor
- With a dual foil dispersive electrode, the Aspen Return Monitor will alarm above 150 ohms, below 10 ohms, and with a 20% increase in resistance above set point. With a single foil dispersive electrode, a two-wire continuity detector alarms at 10 ohms and above.
Operating Frequency
- Cut: 416.7 kHz ± 0.01%.
- Coag: 416.7 kHz ± 0.01%.
Pulse Repetition Frequency
- Blend: 20.0 kHz ± 0.01%.
- Coag: 25.0 kHz ± 0.01%.
- Bipolar: 20.0 kHz ± 0.01%.
Input Voltage
- 104-127 VRMS, 50/60 Hz, calibrated at 120V.
Input Current
- Pure cut at 300: 7.0A max.
Line Frequency Leakage.
- Patient connections to neutral: < 25 μA.
- Chassis to neutral: < 25 μA typical.
RF Leakage Current
- Less than 100 mA (200 ohms to ground).
Power Decrease
- 1% typical. Pure cut set to 150 watts for 20 seconds.
Weight
- 32 lbs (14.5 kg).
Dimensions
- 6.75″H x 14.25″W x 21.5″D (17.1 x 36.2 x 54.6 cm).
View the Conmed Sabre 5000
2 comments
Leave a Reply
Explore Other Blog Items By Category
Recent Posts
![Tourniquet Comparison: Zimmer ATS 4000 vs 2200](https://www.somatechnology.com/app/themes/somatechnology/assets/images/0.gif)
June 20, 2024
![Which Steris Surgical Table is Right for My Facility?](https://www.somatechnology.com/app/themes/somatechnology/assets/images/0.gif)
June 12, 2024
Which Steris Surgical Table is Right for My Facility?
![What is SpO2? – Pulse Oximetry – Oxygen Saturation](https://www.somatechnology.com/app/themes/somatechnology/assets/images/0.gif)
June 5, 2024
Can we do TURP with that?
If yes which slot do I put resectoscope hf cable
Hello Nauman!
That is a great question. You can call 1.800.GET.SOMA and ask to be directed to our service department to help you with that question!
Thanks for reaching out!
Soma Tech Intl