Siemens Maquet Servo-i

Siemens Maquet Servo-i Features

Maquet SERVO-i combines a high level of clinical performance for invasive, non-invasive or neurally controlled ventilation with outstanding mobility and cost efficiency. It features all the modes you would expect from an advanced ventilation system in one adaptable platform. Four basic configurations are available: SERVO-i Infant, SERVO-i Adult, and two editions of Maquet SERVO-i Universal for all patient categories. SERVO-i Infant and SERVO-i Adult can always be upgraded to SERVO-i Universal. The flexible and adaptable ventilator for all patient categories meet today’s – and tomorrow’s – need for different treatment modalities and clinical situations.

• Enables treatment of all patient categories.
• Transportation with no loss of treatment quality within and between hospitals.
• Allows for investigation of different treatment options like Open Lung Tool and Automode.
• Invasive ventilation.
• Non-invasive ventilation with leakage compensation.
• CO2 Analyzer for end tidal carbon dioxide measurement that may give important insight into the efficiency of the ventilation.
• Y sensor measurement, for neonatal/pediatric and adult patients. Enables measurement of pressure and flow as close to the patient’s airway as possible.
• Nasal CPAP.
• Heliox – gives a more laminar flow that reduces work of breathing.
• Stress Index – will monitor hyperinflation or repeated alveolar collapse, thus allowing the identification of injurious ventilation (VILI).⁷
• Ventilation Record Card to facilitate research work and presentations.
• Maquet ventilator accessories and consumables that are fully tested and designed to work optimally with SERVO ventilators.

Siemens Maquet Servo-i Specifications

General

• Dimensions
  • User Interface: W 355 x D 53 x H 295 mm
  • Patient Unit: W 300 x D 205 x H 415 mm
• Weight: Approximately 20 kg (Patient Unit 15 kg, User Interface 5 kg)
• Method of triggering: Flow, pressure and Edi (optional)
• Max. operating pressure: Approximately 115 cmH2O
• Bias flow: 2 l/min

Screen

• Type: TFT-LCD module
• Size: 31 cm (12.1”) diagonal
• Viewing area: 246.0 x 184.5 mm

Operating Conditions

• Operating temperature: +10 to +40ºC
• Relative humidity: 15 to 95% non-condensing
• Atmospheric pressure: 660 to 1060 hPa
• Lowest pressure in breathing system: –400 cmH2O

Power Supply

• Power supply, automatic range selection
  • 100 – 120 V AC ±10%
  • 50 – 60 Hz
  • 220 – 240 V AC ±10%
  • 50 – 60 Hz
• Plug-in battery module
  • Battery backup: Two battery modules are delivered with the ventilator.
  • 50 – 60 Hz
  • 220 – 240 V AC ±10%
  • 50 – 60 Hz
• Battery capacity: Rechargable, 12 V, 3.5 Ah each
• Recharge time: Approximately 3 h/battery
• Battery backup time: At least 3 h, when using six batteries.
• External 12 V DC: 12.0 V – 15.0 V DC, 10 A
• Max power consumption
  • At 100 – 120 V: 2 A, 190 VA, 140 W
  • At 220 – 240 V: 1 A, 190 VA, 140 W

With flu season around the corner, it is imperative to order your ventilators. We also have a service for rent-to-own, long-term rentals, and short-term rentals. Please visit here, to see more ventilator options.