ERBE VIO 200S

24-Hour Quotes

Pricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications

ERBE VIO 200S Features

The ERBE VIO 200S is an electrosurgical unit that offers a variety of cutting and coagulation modes. The ERBE VIO 200S and the VIO 300S can offer automatic power adjustments for voltage, Arc, and power controls.
The VIO 200S electrosurgical unit can provide services for Clinic and specialist surgical operating room procedures. These procedures include Gastroenterology, Endoscopy, Pulmonology, Dermatology, and Ophthalmology. The ERBE APC2 can be combined with the VIO series electrosurgical units providing additional argon modes.

  • Power Peak System PPS – for optimal support during the initial cutting stage, especially low contact impedance situations, allowing the electrode to start in contact with the target tissue.
  • Effect settings for each mode.
  • AUTO START and AUTO STOP features in BIPOLAR SOFT mode.
  • Up to 9 storable programs.
  • User-Friendly interface (FocusView – reduces the visual information to the essentials, simplifying the operation of the unit).
  • Audio and Visual Error Recognition System.

ERBE VIO 200S Specifications

Dimensions

  • Width: 16.1 in ( 410mm)
  • Height: 6.5 in (165 mm)
  • Depth: 15 in (380 mm)
  • Weight: 19 lbs( 8.8 KG)

Operating Mode

  • Intermittent Operation: ON time 25% ( e.g.e activated for 10 sec. / deactivated for 30 sec.)

Ambient conditions for transport and storage of unit

  • Temperature: -40°C to +70°C / -40° F to +158°F
  • Relative Humidity: 10 % – 95%

Ambient conditions for the operation of the unit

  • Temperature: +10° C to + 40°C / +50°F to 104 °F
  • Relative Humidity: 15 % to 80%, nonCondensing

Power Output

  • Maximum CUT Output: 200 watts at 500 ohms
  • Maximum COAG Output: up to 120 watts
  • Safety System: NESSY
  • Frequency: 350 kHz

Mains Connection

  • Power frequency: 50 / 60 Hz
  • Power input during stand-by: 40 Watts
  • Power input during max RF output: 500 watt / 920 VA
  • System voltage: 100-120 / 220-240 V
  • Potential equalization connection: Yes

Standards

  • Classification acc. to 93/42 EWG: IIb
  • Protection category acc. to EN 60 601-1: I
  • Type acc. to EN 60 601-1: CF
  • Category acc. to UMDNS: 11-490

Refurbished ERBE VIO 200 S Electrosurgical Unit

Soma Tech Intl offers a Refurbished ERBE VIO 200 S Electrosurgical unit system up to 50% below OEM prices with the same service and warranty as new. The ERBE Electrosurgical Unit is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts the ERBE VIO system is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on Electrosurgical Units. If necessary, parts are replaced to make sure that all aspects of the pump are functioning correctly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the ERBE system is working like new it undergoes a special cosmetic restoration process. The Electrosurgical Unit is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the infant warmer functions and looks like new. Soma Technology is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment they sell. Before the ERBE VIO 200 S is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished ERBE System contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is also actively looking to purchase an ERBE VIO200 S Electrosurgical Unit System. If you or your facility is looking to sell your electrosurgical units, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Electrosurgical Unit System to Soma Technology takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Technology is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Technology also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain floor space for new equipment, or looking to upgrade current equipment, contact Soma Technology’s purchasing department at [email protected] or send us a message on our Sell to Soma website.

Banner

Questions about our Electrosurgical Units?

Soma Tech Intl offers a wide range of electrosurgical units. If you have any questions about any of our electrosurgical units or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your electrosurgical units? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

1-800-GET-SOMA
Contact Us