Drager Air-Shields TI100

24-Hour Quotes

Pricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications

Drager Air-Shields TI100 Features

The Drager Air-Shields TI100 is intended for the transport of high-risk, premature, low birth-weight, or critically ill newborns. The TI 100 provides a means to control air temperature, oxygen concentrations, and relative humidity. A double-walled hood permits full visibility and an effective thermal barrier from the environment. Front and head access is provided by armports and door panels. The mattress tray slides out of the head end for additional access.

  • Intended for transport of high-risk, premature, low birth-weight, or critically ill newborns.
  • It provides a means to control air temperature, oxygen concentrations, and relative humidity.
  • A double wall hood permits full visibility and provides an effective thermal barrier from the environment.

Drager Air-Shields TI100 Specifications

Dimensions

  • Length: 102 cm (40.25”)
  • Width: 56.5 cm (22.25”)
  • Height: 118.7 cm (46.75”)
  • Weight: 86.7 kg (189 lbs) including hood, stand, and batteries

Power

  • AC: 110/120 VAC 50/60/400 Hz
  • Sine or Wave: 170/200 Watts / 225/270 Watts with batteries charging
  • DC: 12VDC, 115 Watts

Battery

  • Type: Gel, Sealed and rechargeable
  • Voltage: 12VDC nominal
  • Quantity: 2
  • Charging Time: 2 Batteries takes 20 minutes to recharge from fully discharged
  • Life expectancy: Minimum 200 full charge/discharge cycles

Temperature

  • Set Point Range: 21.5? ± 1.0? to 38?
  • Rise Time: 30 Minutes
  • Temp Variability: 0.2?
  • Temp Overshoot: 1.5? Maximum
  • Temp Equilibrium: 1?
  • Temp Uniformity: 1?

Alarms

  • High Temp: Actuates at displayed incubator temperature of 39? ± 0.5?
  • Sensor: Actuates if High Temp alarm sensor is electronically opened or shorted
  • Power Failure: Actuates if main AC power fails and no DC back-up power is present
  • Heater Temp: Actuates if heater temperature exceeds 77? nominal
  • Low DC: Actuates if incubator DC voltage has fallen below 10.5 VDC nominal

Refurbished Drager Air-Shield TI 100 Incubator

Soma Tech Intl offers the Drager Air-Shield TI 100 Incubators up to 50% below OEM prices with the same service and warranty as new. The Drager Air-Shield TI 100 is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Drager Air-Shield TI 100, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on incubators. If necessary, parts are replaced to make sure that all aspects of the Drager Air-Shield TI 100 are to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Drager Air-Shield TI 100 is working like new it undergoes a special cosmetic restoration process. The Drager Air-Shield TI 100 is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Drager Air-Shield TI 100 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Drager Air-Shield TI 100 incubators contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is actively looking to purchase a Drager Air-Shield TI 100. If you or your facility is looking to sell your Drager Air-Shield TI 100 incubator, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Drager Air-Shield TI 100 takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain space for new equipment, or if you are looking to upgrade your current equipment, contact Soma Techn Intl’s purchasing department at [email protected] or send us a message on our Sell to Soma website.

Banner

Questions about our NICU Incubators?

Soma Tech Intl offers a wide range of NICU incubators. If you have any questions about any of our NICU incubators or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your NICU incubators? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

1-800-GET-SOMA
Contact Us